Coupon 🔔 Soda Machine Adapter Hose Kit Direct Connect To Soda Water Make Machine Black ⌛
Original price was: $32.99.$26.39Current price is: $26.39.
- Green products, guaranteed.
- Shop quality, shop with us.
- Experience the difference quality makes.
- 100% Quality Satisfaction
Specification:
Hose length: 60 Inch/150cm
Working pressure: 5000 PSI
Thread For Large CO2 Tank: CGA320 G1/2-14.
Instructions:
1.Screw the CGA320 Nut to large CO2 gas cylinder and tighten it by wrench;
2.Remove the black adapter from the quick coupler firstly,and screw it onto the soda machine by wrench,then connect the quick coupler;
3.Open the valve of the large gas bottle;
4.Done,you can enjoy your sparkling water.
if you want unscrew the pin valve from the machine:
1.Close valve of the large gas bottle;
2. Press the machine button several times to let the gas out, otherwise the o ring in coupler will be blowed out.
3.Disconnect the quick coupler.
Please pay attention:Our unit works with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your drink.
- Allows to use a standard CGA-320 large CO2 tank in most soda machines. Works with most soda machines and allows normal operation without any permanent changes.(not suitable for Terra series)
- Save money on the refill. This system allows you to connect your soda machine to CG320 co2 tank.Outlet Valve, like 5lb, 20LB or 50lb commercial CO2 tanks.
- DN3 6mm Microbore Hose length 5ft(1.5 meter), high pressure hose,very soft,not easy to fold break. The hose material is food-grade materials, which is no odour.
- Suitable CGA320 Valve of CO2 Tank (USA, CAN, Brazil, Colombia, Philippines…).Tips: this soda water accessory can not work with RPV-value(residual pressure value), please check your CO2 value before purchase.
- Light weight and Easy to Install, this soda co2 cartridges adapter is 60 inches long and the weight is sonly about 0.33kg,compared to other heavy ones,this one is more suitable for quick installation.
| Size | 60inch |
|---|---|
| Color | Black |
6 reviews for Coupon 🔔 Soda Machine Adapter Hose Kit Direct Connect To Soda Water Make Machine Black ⌛
Add a review
Related products
BFoosh –
First of all, this thing does it’s job. It will leak for sure, if all you do is hand tighten it at the tank. That’s super high pressure! Tighten it with a wrench and it won’t leak CO2! My only complaint is I ordered the 60 inch and got the 36 inch. Will probably return for that reason only. I bought three different brands, just in case, after seeing the reviews mentioning the leaks. They all worked fine.
John Cruze –
This was delivered to me March 9th. I purchased a 5lb CO2 bottle from a local gas supplier. All good.1) I asked for a ‘self-siphoning’ bottle, which they do not supply. If you don’t have a self-siphoning bottle, then use the tank inverted, with the valve down. The CO2 in the tank is a liquid, so it needs to flow out through the valve on the bottle. I am going to construct a stand out of PVC to hold it upside down.2) The purchase included two nylon white washers, which are the same. Use one to connect the CGA320 Adapter Hose to the CO2 bottle. The other is a spare. Then tighten with a wrench. I asked the gas supplier about using teflon tape. He said this was a big no-no, he said if you have to use teflon tape with high pressure gas (3000psi), then something is wrong. I am not using teflon tape ANYWHERE, and have no leaks in the line. I tested with dawn detergent self-foaming soap. No gas bubbles. This is good. He also suggested securing the black gas line when first using. If it fails, it can seriously whip around and cause injuries, and prevent you from reaching the shutoff. Good advice.3) Use a wrench to tighten the plastic fitting into the Sodastream. Make sure to tighten, but not tight enough to crack the plastic.4) The SodaStream ‘puff button’ on the top actually causes a slow leak through the probe that goes into the SodaStream water bottle. See if yours does this. Put a SodaStream water bottle filled up to the line into the unit. Look for little tiny CO2 leaks into the water. If you have small bubble leaks without pushing the puffer button, then your SodaStream itself is causing a very slow leak. Lesson Learned: Close the valve on the CO2 bottle when done using. Even after closing the valve the residual pressure in the black line caused some bubbles.5) I filled the SodaStream bottle several times to clear out any residual plastic taste. Actually I never noticed it at all, but did it anyway.6) Use cold water, since this will absorb more CO2 then warm water.7) It would be really helpful if the product came with some instructions.
Jose A Mendez –
Hi I bought this adapter because I changed my 14.5 oz CO2 for Kegco 5 lb. Aluminum Co2 Tank witch I refills for the chipper price but when you do that be sure the soda stream machine you have can work with the adapter it’s not for all of the soda stream machine’s my is working perfect, I loved ? and I refill my 5 lb. for $22.00 and I have gas for months, the soda stream cylinder 14.5 oz. you can make up to 60 L so with 5 lb. thank do the math you will be in heaven I bought this because in México we have an old soda fountain Cafe and every day after school I go there and I ordered carbonate water with fresh strawberry marmalade and after you finish the water you eating the fresh strawberries with the spoon and I miss that flavor so I made my fresh strawberry ? marmalade which I go to the farm pick up my strawberry make my fresh marmalade and I make my fever drink, tried you will loved too ?
Steve Johnson –
Talk about easy…One end goes on your CO2 tank’s standard CGA320 threaded valve. I recommend you tighten that with a wrench so that it’s snug. The other end threads into your SodaStream’s back where the CO2 cannister would normally go. Hand-tighten that end with the same pressure you would use to replace a SodaStream CO2 cannister.The SodaStream already has a regulator built in so, open the valve on the tank and that’s it. Carbonate as usual. I was drinking a lot of club soda and exchanging empty SodaStream CO2 cannisters at Target…Then I did the math. After I use the equivalent of nine-ish SodaStream bottles I will have saved the same amount of money as I spent on a 5lb CO2 tank AND this hose. I should have done this a long time ago.My SodaStream is a SOURCE. It takes the BLUE WRAPPED BOTTLES. It does NOT use the PINK bottle which I’m pretty sure has a different connector. If you have a different SodaStream Machine than mine, YMMV.Oh! This product came with washer’s for both ends. I already had one on my tank and one in my SodaStream but hey, extras!TLDR: If you’re using BLUE SodaStream CO2 cannisters, get this hose and a CO2 tank and start saving $$!!
Tom Laabs –
If running down like my setup then drill 1.5 in hole in shelf and sit unit on top. If on same level or unable to drill then need to make a 1/4 in notch in back of unit to run hose out. Instead of using the$30 each for only 14 Oz I have a 5lb tank from my local Airgas dealer they have up to 180lb tanks my little 5lb is$25 refill if I got the 10 it’s$35 so each fill is about 6 disposable tanks. I know they have deposit but no one local does it and having to mail back and forth no thanks. Easy to hook up, just need large wrench 1-1/8 for the tank best to just get a decent adjustable one, but make sure you don’t tighten it with lose grip fittings are brass they will round off if you slip. I recommend the vise grip crescent wrench it don’t slip.
Amazon Customer –
Very easy to install