- Brand: FOMAJI
- Color: 6Pcs
- Material: Silicone
- γConvenient DesignγWhen you use various small appliances in the kitchen, you don’t have to worry about messy power cords, this is a small hub specially designed to solve the trouble of messy household cords. The ends can be twisted to wrap around wires. The whole product is made of high-quality silicone with good ductility. Finally, the end wires can be fixed. The card slot in the middle can help you solve the trouble of messy lines.
- γMultifunctional and Convenient Designγ: This is a small wire organizer, which allows you to easily wind the wires with one hand. All your kitchen equipment wiring will be well organized and expandable. Finally, the end wires can be fixed. The card slot in the middle can help you solve the trouble of messy linesγ
- γHigh Quality Safety Materialγ: Our rope organizer is made of high quality rubber, which is durable and not easy to deform. The glue at the bottom is a high-quality glue selected, which is not easy to fall off. To ensure a secure connection, scrub and clean the surfaces of the connected equipment with clean water before connecting the cord organizer. Allow to dry for at least 6 hours before use.
- γPerfect cord wrapperγοΌAfter purchase, you will have 15pcs of cord organizer.Same standard, same quality,different color choices.Gives peace of mind as you always have one replacement in hand.
- [Good helper in the kitchen]: The wires of household appliances are placed in disorder for a long time, which is easy to damage the wires or trip over by the elderly and children. Show your gratitude and love by gifting this rope organizer to your mother, girlfriend, wife, or anyone who needs to cook in the kitchen frequently!




























Misstchristine –
Overall, this product is great. Just know that it’s not useable straight out of the box. Each piece has a slight convex arch to it so that the part that is meant to stick to your appliance does not lay flush. A better adhesive design option would be the two sided puffy adhesive strips so that the gap btwn the appliance and plastic piece is closed. I had some on hand and it was an easy fix.
Doris A. Ganser –
I thought the idea was great, everyone has cables that need taming. I passed on two to a friend who happened to be visiting when the cable holders arrived because I was absolutely convinced of the utility of the item. Now I am embarrassed about having given her those 2 cable holders because the first one I applied had fallen off by the next morning. Yes the surface was absolutely clean but it was slightly, but only slightly, curved. I thought maybe I had not held the cable holder on long enough, but the next morning it had fallen off again. So I cleaned up a perfectly plane straight surface, stuck a new one on, and it, too, had fallen off by the next day. Facit: The idea is good but the adhesive is not strong enough to adhere for longer than a few hours. Unfortunately… The item was inexpensive, so I did not even bother to return it, especially since my set was no longer complete. I guess if it does not matter for the surface to become marred, one could use another strong adhesive, glue the cable holder on with two-component adhesive or some other permanent glue. Mine were supposed to go on a coffee maker and a toaster that I don’t want to “decorate” with adhesive. Shame…
Lovestoshop –
Was very excited to get these as the cupboard where I store them allows my appliance cords to get tangled in each other. Well, the device did not stay stuck to the appliance. Within a week almost all of them came undone. I’m still giving 3 stars because I love the concept and am hoping with some gorilla glue I can get these to work again.
Brynne –
These were fine. I feel like even if I let them cure for awhile the plastic still came apart from the adhesive. Unfortunate since I really loved how big they were, which allowed for a lot of cord to be wrapped.
Rhonda B Rollins –
Definitely not for thick cords. May move use 2 of them? The middle that holds the end is kind of hard to put the cord into. Itβs fine for cell charging cords. The idea is great if they would produce something thatβs actually does what it meant to do. For me itβs not really with the trouble. It took awhile working with cord just to find out it just isnβt worth my time or money. I gave it a 3 because for thinner cords it seemed to work better. If there is too much of a thickness it would come unstuck and all your time snd work came unwrapped. I gave up on the appliance cords.
AP –
Sorry to say this isn’t going to work for alliances worth thick cord (air fryer and kitchen aid). The sticker didn’t stay as the cord was to heavy and it pulled off. Works for coffee maker or other small appliances.
TMT –
I tried one on a coffee maker and it would not stay. I thought maybe the heat from the coffee maker had something to do with it. My husband used one for a fan cord. Again, it would not stay on it. We even tried using Velcro to both side and they fell off. I followed the instructions too. Great concept but needs some work.
Amazon Customer –
Looks nice on my mixer, 3M adhesive is always top notch, but the material used is kind of flimsy..