- Brand: ANTOBLE
- Capacity: 18 Quarts, 16 Quarts, 23 Quarts
- Material: Silicone
- Color: 2 Pack
- Control Method: App
- Operation Mode: Automatic
- Is Dishwasher Safe: No
- ใPremium QualityใOur 09985 presto sealing ring is made of food-grade silicone material, which is non-toxic, heat-resistant, tear-resistant and durable to use.
- ใ09985 Pressure Canner Sealing RingใCompatible with Presto pressure canner models 0174510 (16 qt), 0175107 (18 qt), 0175510 (16 qt), 0178107 (23 qt), 0178209 (23 qt), 0178410 (23 qt).
- ใFunctionใThe sealing ring 09985 fits around the inside rim of the cover and forms a secure pressure-tight seal between the cover and the body of the pressure cooker during canning and cooking.
- ใInstallation StepsใFirst, remove the old sealing ring and overpressure plug, thoroughly clean the sealing ring groove and overpressure plug hole; Then install the cleaned sealing ring by working it into the cover a small section at a time until it is fully in place; To install the overpressure plug, push the round side of the rubber plug (marked “TOP”) into the opening from the underside of the cover; Finally open and close the cover several times to make it operate more freely.
- ใWarm PromptใIt’s recommended to replace the gasket every 1-2 years in order to make your pressure cooker work better. Only fit for Presto pressure cooker models, please confirm whether our 09985 gasket matches your pressure cooker before purchasing.




























Lyle –
Pressure seal failure can turn your hair white fast. Better safe then aged. Caning prep takes time. Nothing worse than finding out the seal is deform when your setting your jars.
Debbie Bast –
Seal for pressure canner. Good.
Randy Williams –
I got them to have. I have not needed to use them. They are made for my cooker, should work.
J.R. –
They are exactly as I needed for back up replacement parts for my canner. I kept my canner box and they are now safely stored in the box for the day I need to replace my seals!! They arrived quickly after ordering and they are the correct parts!
Patricia Pate –
They seem fine, have not used as they are back ups.
Rosebud –
Got them and used one the next day and it for perfect and worked great.
Alika Nash –
If your a serious canner, like myself. Good item to order and have on hand in case itโs needed.
Super Dave Osbourne –
DO NOT use out of bag, wash in hot water first. Debris from form/molding process is very likely. I found 2 of the 6 with fragments from the molding/form process on them, and this was after I had tested (1.5 hours involvement) all six. Sad statistics. 33% ‘failure’ rate, very pour quality control. That was just the large lid seals, I have not even looked at or tested the small companion 15+ PSI initial black plug types. This kit does NOT come with the white gasket ring for the secondary pressure close valve. Buyer beware, not cheap, not expensive, sadly lacking quality control on 33% of the lid rings i received.